On the Mass Transfer Behaviors in Hollcw-Fiber Membrane Modules for $CO_2$ Separation

이산화탄소 분리를 위한 중공사막 모듈에서의 물질전달 거동

  • 전명석 (한국화학연구소, 고분자소재부 분리소재연구실, 대전 305-606) ;
  • 김영목 (한국화학연구소, 고분자소재부 분리소재연구실, 대전 305-606) ;
  • 이규호 (한국화학연구소, 고분자소재부 분리소재연구실, 대전 305-606)
  • Published : 1994.04.01

Abstract

High permeability, selectivity and stability are the basic properties also required for membrane gas separations. The $CO_2$ separation by liquid membranes has been developed as a new technique to improve the permeability and selectivity of polymeric membranes. Sirkar et al.(1) have atlempted the hollow-fiber contained liquid membrane technique under four different operational modes, and permeation models have been proposed for all modes. Compared to a conventional liquid membrane, the diffusional resistance decreased by the work of Teramoto et al.(2), who referred to a moving liquid membrane. Recently, Shelekhin and Beckman (3) considered the possibility of combining absorption and membrane separation processes in one integrated system called a membrane absorber. Their analysis could be predicted effectively the performance of flat sheet membrane, however, there are restrictions for considering a flow effect. The gas absorption rate is determined by both an interfacial area and a mass transfer coefficient. It can be easily understood that although the mass transfer coefficients in hollow fiber modules are smaller than in conventional contactors, the substantial increase of the interfacial area can result in a more efficient absorber (4). In order to predict a performance in the general system of hollow-fiber membrane absorber, a gas-liquid mass transfor should be investigated inevitably. The influence of liquid velocity on both a mass transfer and a performance will be described, and then compared with experimental results. A present study is attempted to provide the fundamentals for understanding aspects of promising a hollow-fiber membrane absorber.

Keywords