싱글칩 마이크로프로세서에 의한 로드셀 신호의 A/D 변환 안정화 처리

A Stable A/D Conversion of Load Cell Signal by Single Chip Microprocessor

  • 박찬원 (강원대학교 전기공학과) ;
  • 안광희 (강원대학교 전기공학과) ;
  • 최규석 (강원대학교 전기공학과)
  • Park, C.W. (Dept. of Electrical Engineering, Kang Won National University) ;
  • An, K.H. (Dept. of Electrical Engineering, Kang Won National University) ;
  • Choi, G.S. (Dept. of Electrical Engineering, Kang Won National University)
  • 발행 : 1993.07.18

초록

In this study, a method is suggested to design the A/D conversion system which has high resolution to convert load cell signal. First, hardware was designed to reduce the offset voltage of integrator and comparator. And then, a calibration software technique was performed to obtain the stable data from A/D converter. The optimal parameters of each elements in the circuits was selected using the SPICE simulation. The main advantage of our method is high precision A/D converter can be constructed with low cost and high confidence. Therefore proposed method is expected to be used in the industrial field where a high precision measurement is required.

키워드