제어로봇시스템학회:학술대회논문집
- 1991.10a
- /
- Pages.252-257
- /
- 1991
A study on in-process measurement of hardening depth for LASER surface hardening process control
강재의 레이저 표면경화 공정제어를 위한 경화층깊이의 실시간 측정에 관한 연구
Abstract
This paper proposed that the eddy-current measurement method can be used a means of in-process measuring the hardening depth in Laser surface treatment process. Also, this paper deal with the numerical analysis of magnetic flux distribution and experimental result of measurement. In Laser heat treatment process of steels, a thin layer of the substrate is rapidly heated to austenitizing temperature and subsequently cooled at a very fast rate due to the self-quenching by heat conduction into the bulk body, to produce a martensite structure which have low magnetic permeability. The eddy-current measurement method depends on the properties of material to be measured such as electric conductivity, magnetic permeability and geometry. In this paper, the hardening depth was measured by detecting relevant magnetic permeability changes caused by heat treatment of steels.
Keywords