제어로봇시스템학회:학술대회논문집
- 1989.10a
- /
- Pages.877-880
- /
- 1989
New type of DC voltage regulator using optical fiber as sense line
- Ikeda, Hiroaki (Department of Electrical Engineering, Shizuoka University) ;
- Li, Jinzhu (Department of Electrical Engineering, Shizuoka University) ;
- Miyashita, Masatoshi (Department of Electrical Engineering, Shizuoka University) ;
- Yoshida, Hirofumi (Department of Electrical Engineering, Shizuoka University) ;
- Andou, Minoru (Department of Electrical Engineering, Shizuoka University) ;
- Shinohara, Shigenobu (Department of Electrical Engineering, Shizuoka University) ;
- Tsuchiya, Etsuo (Palcom Electronics Corporation) ;
- Nishimura, Ken-Ichi (Palcom Electronics Corporation, Hamamatsu Japan)
- Published : 1989.10.01
Abstract
Described is a DC voltage regulator of new type where an optical fiber is used as a sense line to transmit the PFM signal, which represents the load voltage and its change, from the load to the controller so as to make the equivalent sense-line length short. The prototype version provides a load voltage change rate of 2.3% over the current range of 0A to 5A at 15V DC, with an output impedance of 0.06ohm.
Keywords